Descriptions:The mill, manufactured by our company, has adopted the most advanced technologies aboard and designed according to the practical situation at home.
        It is widely used for grinding materials like earth, nonmetal ore, chemical compounds, metals, building materials, etc. 
        The size of products is within 0.125-0.044mm (120-325mesh). The machine is especially used in the production of nonmetal ores.

Use：It can be used to grind materials such as pyrite, wollastonite, talcum, asbestos, feldspar, gypsum, barite, Witherite, trona, calcite, magnesite, fluorite, gems, jade, agate, limestone, chalk, dolomite, quartzrock, sandstone, quartz sand, diatomaceous earth, shale, kaolin, ceramic clay, fire-proof clay, marble, granite, halite ore, boron ore, phosphate ore, etc. with Mohs scale of hardness under 7 and humidity below 6%.

Composition：It consists of the mainframe, the selector, the pipe device, the blower, the crusher, the elevator, the vibrating feeder, the hopper, the cleaner, the integrated electrical controller, etc.

Features：1.The size of the products is smaller. It can grind blocks with sizes within 1-20mm and produce products with sizes less than 1250mesh. high productivity The productivity is 30% more than that of the Raymond grinder. 2.Economical. 3.Environmentally friendly: The working area is very clean and little powder is released. 4.Wide range of applications: It is tested that the pendulous grinder is available to grind all materials which can be ground. 5.Higher efficiency: The larger roller increases contact area.

Working Principle：The shaft rotates with the transmission. On the top of the shaft, there is a quincuncial frame on which a roller device and a shovel device are installed. The material is thrown between the roller and the ring by the shovel device, and ground by the centrifugal force generated by the rotating roller. Powder in required sizes will blow away by the blower, is classified in the separator, is discharged after passing through the pipe with the air.